Page 14 - Tower Catalog
P. 14

La ce and Guyed Tower
SA-B Mfr Part #
S ff Arm Kits
Stand-off Brackets
Applica on: Antenna moun ng
Size: 10' 6" (3.1 m) or 12' 6" (3.8 m) long
Design: Universal adjustable, rotatable a achment
Feature: Mounts to tower members up to 8" (203.2 mm) OD Mounts to: Round and angle legs
Material: Hot dip galvanized steel
Includes: A achment hardware
Applica on: La ce towers
Size: 24" (0.6 m) to 72" (1.8 m) stand-
off
Design: One-piece welded stand-off
Feature: Ideal for omni antennas
Mounts to: Straight or tapered legs
up to 3-1/2" (88.9 mm) OD, clamps in-
cluded
Material: Hot dip galvanized steel
Includes: Stand-off and clamps
Order Separately: Adapter clamp sets if required (pg 15)
SA-B12
Weight, lb
13 20
20
53 60
Mfr Part #
Descrip on
Weight, lb
S-200
24" (0.6 m) with 24" Moun ng Pipe
22 41 54
S-300
36" (0.9 m) with 24" Moun ng Pipe 28
Descrip on
S-400
S-600
48" (1.2 m) with 32" Moun ng Pipe
72" (1.8 m) with 32" Moun ng Pipe
S-500
60" (1.5 m) with 32" Moun ng Pipe 47
S ff Arm Bracket, Pipes Ordered Separately
SA-B For 2-3/8" (60.3 mm) OD Pipe
For 2-3/8" (60.3 mm) OD Pipe, up to 8"
Wind Ra ng*: 120 mph per latest version of TIA/EIA-222
SA-BL (203.2 mm) Tower Legs
*Typical installa on of (1) 20' Omni antenna
Universal for 1-1/4" to 3-1/2"
(31.8 mm to 88.9 mm) OD Pipe, up to 4- SA-BU 1/2" (114.3) Tower Legs
Panel Antenna Stand-off Brackets
S ff Arm Kits, Up to 4-1/2" Tower Legs
Applica on: La ce towers
Size: 12" (0.3 m) to 48" (1.2 m) Design: One-piece welded stand-off Feature: Solu on for panel antennas Mounts to: Tower member
Material: Hot dip galvanized steel Includes: Stand-off only
Order Separately: Pipe-to-pipe clamps (pgs 15-16)
With Two Threaded 2-3/8" OD x 63" SA-B10 (60.3 mm OD x 1.6 m) pipes
With 2-3/8" OD x 12' 6" (60.3 mm OD x SA-B12 3.8 m) pipe
3' Universal Stand-off Mount
P-100 12" (0.3 m) 42
Applica on: La ce Towers
Size: 36" Stand-off
Design: Universal stand-off bracket
Feature: Square tube stand-off
weldment
Mounts to: Up to 8-5/8" OD round legs,
up to 8" 60o angle legs, up to 6" 90o angle legs Material: Hot dip galvanized steel
Includes: Stand-off and hardware (see below) Order Separately: Antenna moun ng pipe (pg 50)
Mfr Part # Weight, lb
P-300 36" (0.9 m) 62
P-400 48" (1.2 m) 70
Wind Ra ng*: 120 mph per latest version of TIA/EIA-222 at 150' AGL
*Typical installa on of (1) 72" x 8" panel antenna per sector
Double Antenna Clamp
Andrew Solu ons B3100A 80
Applica on: Antenna moun ng Size: 16" (406.4 mm) wide
Design: Double pipe-to-pipe clamp Feature: Converts pipe to accept two antennas
includes u-bolts for 3-1/2" oD pipe. Slo ed holes to accept
2-3/8" - 4-1/2" oD pipe. order addi onal u-bolts separately (pg 64). NOTE: Pipe is ordered separately; see page 50.
Mounts to: 1-1/2" to 3-1/2"
(38.1 mm to 88.9 mm) OD Material: Hot dip galvanized steel Includes: Clamp assembly
Order Separately: 1-1/2" to 3-1/2" OD pipe (pg 50)
Mfr Part # Weight, lb
Andrew Solu ons DA-C200 NOTE: Pipe is ordered separately; see page 50.
23
14
(800) 435-1636 tel
| (800) 767-7605 fax | www.primuselectronics.com
SA-B10
Mfr Part # Descrip on Weight, lb
P-200 24" (0.6 m) 54
Andrew Solu ons
Andrew Solu ons
Andrew Solu ons


































































































   12   13   14   15   16