Page 140 - Tower Catalog
P. 140

Enclosures
Type 3R Screw Cover Painted Enclosures
Construc on:
• Used as wiring boxes, junc on and pull boxes and protects against falling rain, sleet and external ice forma on
• Enclosure and cover are fabricated from code gauge galvaneal steel for painted steel
• Enclosure body has embossed moun ng holes on the back
• Available with or without knockouts on the bo om end of enclosures
less than 30" wide
• Cover is held secure by sliding it under the top end flange and fastening with plated screws on the bo om end flange (larger sizes use two
studs and wing nuts)
• #10-32 tapped hole provision for op onal ground lug kit
it
Part # 18186RTSC
10108RTSC 18188RTSC
Finish:
Enclosure Size (A x B x C)
Enclosure Size (A x B x C)
Enclosure Size (A x B x C)
Part # 12124RTSC
1086RTSC 12126RTSC
Type 3 Gasketed Screw Cover Enclosures Construc on:
• Used as wiring boxes, junc on and pull boxes
• Intended for indoor or outdoor use
Part # 24168RTSC 24188RTSC 24248RTSC 242412RTSC 362412RTSC
• Wash and phosphate undercoat
• ANSI 61 gray acrylic electrocoat finish
12 x 12 x 4 10 x 8 x 6 12 x 12 x 6
18 x 18 x 6 10 x 10 x 8 18 x 18 x 8
24 x 16 x 8
Standards:
24 x 18 x 8
866RTSC 8 x 8 x 6
24246RTSC 24 x 24 x 6
• UL 50 listed, Type 3R
• CSA C22.2 No. 40 cer fied, Type 3R • Conforms to NEMA standard for
24 x 24 x 8
24 x 24 x 12
1286RTSC 12 x 8 x 6
12128RTSC 12 x 12 x 8
Type 3R
• IEC 60529, IP32
36 x 24 x 12
• Protects against windblown dust, rain, sleet, external ice forma on and dripping noncorrosive liquids
• Enclosure and cover are fabricated from code gauge G-90 grade galvanized steel • All con nuous welded seams are finished smooth
• Enclosure standard without knockouts
• Cover is a ached with gasketed screws
• Cover has a fixed, oil and water resistant gasket
• #10-32 weldnut is furnished for op onal ground lug kit
Part # 444-SCG
864-SCG 1084-SCG 12124-SCG
Enclosure Size (A x B x C)
Enclosure Size (A x B x C)
Enclosure Size (A x B x C)
Finish:
Part # 888-SCG
12106-SCG 16126-SCG 18186-SCG
Part # 24246-SCG 12128-SCG 20208-SCG 24208-SCG 24248-SCG 242412-SCG 303012-SCG 363612-SCG
• Bright galvanized finish
• Zinc-rich coa ng over all external
4 x 4 x 4
8x 8x 6 12 x 10 x 6 16 x 12 x 6 18 x 18 x 6
24 x 24 x 6
welds
8 x 6 x 4 10 x 8 x 4 12 x 12 x 4
12 x 12 x 8
664-SCG 6 x 6 x 4
10106-SCG 10 x 10 x 6
Standards:
20 x 20 x 8
• UL 508 listed, Type 3 and Type 12 • Conforms to NEMA standard for
24 x 20 x 8
884-SCG 8 x 8 x 4
12126-SCG 12 x 12 x 6
Type 3 and Type 12 • IEC 60529, IP66
24 x 24 x 8
24 x 24 x 12
10104-SCG 10 x 10 x 4
16166-SCG 16 x 16 x 6
30 x 30 x 12
36 x 36 x 12
666-SCG 6 x 6 x 6
20166-SCG 20 x 16 x 6
140
(800) 435-1636 tel |
(800) 767-7605 fax
| www.primuselectronics.com


































































































   138   139   140   141   142