Page 28 - Tower Catalog
P. 28

Roof-Top
Non-Penetra ng Roof-Top Peak Frames
Mul -Sector Cluster Mount
Applica on: Roof-Top
Size: 36" (914.4 mm) wide ballast trays Design: Non-penetra ng design
Feature: Accepts 2-3/8" to 4-1/2" OD antenna moun ng pipes
Mounts to: Peaked roofs
Material: Hot dip galvanized
steel
Includes: Ballast tray,  e down
angles, mount, hardware
Order Separately: Antenna moun ng pipes (pg 50) and rubber mats (pg 31)
Applica on: Roof-top
Design: 3-sector clamp-on mount Feature: Ideal for tripods
Mounts to: 4"-8" OD member
Material: Hot dip galvanized steel Includes: Brackets and U-bolts
Order Separately: 2-3/8" OD pipes (pg 50)
Mfr Andrew Solu ons
Weight, Part # Descrip on lb
Mfr
Andrew Solu ons
Part # Descrip on
TP-MSC For 4" to 6" OD Pipe TP-MSC-68 For 6" to 8" OD Pipe
Weight, lb 44.7 46.7
Weight, lb 72.7
Base Kit, 2-3/8" to 4-1/2" OD,
RT-PM-B Pipe ordered separately 105
Non-Penetra ng Parapet Roof Mount
Universal Tripod Mounts
Applica on: Roof-top
Size: 36" (0.9 m) x 49" (1.2 m) frame with a 2-3/8" (60.3 mm) x 86" (2.2 m) moun ng pipe Design: Non-penetra ng
Feature: Adjustable stand-off
Includes: Mount and hardware
Order Separately: Rubber mats (pg 31)
Applica on: Roof-top
Design: Heavy duty tripod mount Feature: Interchangeable base unit Material: Hot dip galvanized steel Includes: Mount
Order Separately: Pipe (pg 50)
and sled (below)
Mfr Andrew Solu ons
Part # Descrip on
2-3/8" OD x 86" Adjustable
Mfr Part # Descrip on Weight, lb
RF-PM86 Mast Pipe
Base Only, Pipe and Purchased Separately
Stand-Off Wall Mount
TP-G238-B For 2-3/8" (60.3 mm) OD pipe 114.3
Applica on: Roof-top
Size: 36" (0.9 m) stand-off
Design: Welded stand-off mount
Feature: Heavy duty for
microwave antennas
Mounts to: Walls
Material: Hot dip galvanized steel
Includes: Bracket, s ff-arm, and wall
mount hardware
Order Separately: 3-1/2" or 4-1/2" OD pipe (pg 50)
For 2-7/8" (73 mm)
TP-G300-B or 3-1/2" (88.9 OD) 114.3
TP-G412-B For 4-1/2" (114.3 mm) OD pipe 173.4
NOTE: Pipe is ordered separately; see page 50.
Wind Ra ng*: 85 mph (BWS) per latest revision of TIA/EIA-222 Exposure ā€œCā€ per UBC, at 100' AGL
*Typical installa on of (1) 6' dish using 4-1/2" pipe mast
Non-Penetra ng Roof Ballast Sled for Tripods
Mfr Part # Descrip on
Andrew 36" for Solid or Hollow Walls In- Solu ons DM-300 cludes 72" (1.8 m) S ff Arm
Weight, lb 151
Applica on: Roof-top
Size: 87" (2.2 m) faces
Design: Converts tripods to non-penetra ng
Feature: Three ballast trays Material: Hot dip galvanized steel Includes: Sled only
Order Separately: Tripod (above) and 6 rubber mats (pg 31)
Can lever Wall Mount Bracket
Mfr Part # Andrew
Solu ons MT-416
Weight, Descrip on lb
Applica on: Roof-top
Size: 14-1/2" (368.3 mm) wide, 2-3/4" or 5-1/2" depth Design: Z-shaped wall brackets
Feature: Low profile design
Mounts to: Solid or hollow walls
Material: Hot dip galvanized steel
Includes: Two brackets, U-bolts, anchors,
and wall mount hardware
Order Separately: 2-3/8" OD pipe (pg 50)
Non-penetra ng Roof Ballast Sled,
Tripod ordered separately 171.7
For 2-3/8" Pipe, Pipe Ordered Separately
20.6 24.5
Mfr Part # Descrip on Weight, lb
28
(800) 435-1636 tel |
MT-250 2-3/4" Stand-off, Kit of 2 MT-250L 5-1/2" Stand-off, Kit of 2
(800) 767-7605 fax | www.primuselectronics.com
Andrew Solu ons
Andrew Solu ons


































































































   26   27   28   29   30