Page 61 - Tower Catalog
P. 61

Tapered Self-Support Tower Sub-Horizontals
Structural Reinforcement
• Designed to strengthen tower legs by reducing their KL/r value • Complete kits contain (6) Angles, (3) Brackets,
(3) Center Plates, (6) 5/8" U-bolts, (27) 5/8" Bolts • All material is minimum A36, Hardware is A325X,
Hot-Dip Galvanized
• Connec ons use Squirter® F959 DTI washers to ensure proper installed bolt tension
• Double bolted angle connec ons at both ends
• Brackets center themselves on legs with the welded solid
rods on backside
• Specify leg bu erfly bracket kit + angle / center plate kit
[Qty: (3) per Kit]
Sub Horizontal Angle & Center Plate
Leg Ø Range (O.D.) (in)
Leg Bu erfly Bracket
U-Bolt Size
kit # RSh-0515-25 RSh-0525-35 RSh-0535-45 RSh-0545-68 RSh-0568-86 RSh-0586-00
1.5 - 2.5 2.5 - 3.5 3.5 - 4.5 4.5 - 6.75 6.75 - 8.625
5/8" x 2-9/16" 5/8" x 3-9/16" 5/8" x 4-9/16" 5/8" x 6-13/16" 5/8" x 8-11/16"
8.625 - 10.75 5/8" x 10-13/16"
Tower Face
Width Range Center Plate Sub-Horizontal Φ Pn Leg Pu*
Mfr ( ) Size Size (kips) (kips)
kit # RSh-0605-06 RSh-0606-07 RSh-0607-09 RSh-0609-11 RSh-0611-13 RSh-0613-15 RSh-0615-17 RSh-0617-19 RSh-0619-21 RSh-0621-23
5 -6 6 -7 7 -9 9 - 11 11 - 13 13 - 15 15 - 17 17 - 19 19 - 21 21 - 23
3/8" x 3" 3/8" x 3" 3/8" x 3" 3/8" x 3" 3/8" x 3" 1/2" x 4" 1/2" x 4" 1/2" x 4" 5/8" x 4" 5/8" x 4"
2" x 2" x 3/16"
20.00 800 18.00 720 13.75 550
2" x 2" x 3/16"
2" x 2" x 1/4"
9.50 380 12.13 485 8.50 340 16.50 660 12.50 500 16.00 640 12.88 515
2" x 2" x 1/4"
2-1/2" x 2-1/2" x 1/4"
2-1/2" x 2-1/2" x 1/4"
3" x 3" x 1/4"
3" x 3" x 1/4"
3-1/2" x 3-1/2" x 1/4"
3-1/2" x 3-1/2" x 1/4"
15.88 635
RSh-0623-25
23 - 25
5/8" x 4"
4" x 4" x 1/4"
*CAPACITY BASED ON FULLY LOADING HORIZONTAL WITH 2.5% OF LEG COMPRESSION NOTE: Order (1) RSH-05##-## kit and (1) RSH-06##-## kit for (1) full sub-horizontal assembly
Guyed Tower Torque Arm
• Designed to provide torsion resistance to guyed towers when needed
• Kits contain all materials to bolt torque arm onto tower
• All material is minimum A572-50, Hardware is A325X, Hot-Dip Galvanized • Connec ons use Squirter F959 DTI washers to ensure
proper installed bolt tension
• Fits guyed towers with 1.25" - 3.5" OD Legs
• Add split pipe sleeve kit if tower leg is 2" SCH 40,
2.5" SCH 40 or 3" SCH 40 [Qty: (3) per kit]
• Use split pipe sleeves to avoid crimping thin wall pipe legs
Mfr
Face Width (C-C) (in) 18
24
30
33
36
39
41
42
45
48
54
57
60
72
EHS WIRE SIZE
< 5/16"      3/8"  7/16"  1/2" 9/16" 5/8"   11/16" 3/4"
7/8"   1"
RTA-1335-24
RTA-1135-18
RTA-1235-18
Towers with SCH 40 Pipe Legs: Split Pipe Sleeves
RTA-1135-24 RTA-1135-30
RTA-1235-24 RTA-1235-30
RTA-1335-30 RTA-1335-33
Leg OD
RTA-1135-33
RTA-1235-33
RTA-1235-36 RTA-1235-39
RTA-1335-36 RTA-1335-39
2.875"
3.5"
Kit #
2.375"
RGA-1000-23
RGA-1000-28
RGA-1000-35
RTA-1235-41
RTA-1335-41
RTA-1235-42 RTA-1235-45
RTA-1335-42 RTA-1335-45
RTA-1235-48
RTA-1335-48 RTA-1335-54
RTA-1235-54 RTA-1235-57
RTA-1335-57
RTA-1235-60 RTA-1235-72
RTA-1335-60 RTA-1335-72
LIGHT
MEDIUM HEAVY
61
Structural Components Structural Components


































































































   59   60   61   62   63