Cable Hangers & Support

Cable Tie, Heat Stabilized, Weather-resistant, 460 mm length, 100 ct.

Part#: CT-460-100

RFS CLAMP-060 Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide, 10 ct.

Part#: CLAMP-060

Grommet with (4) 6mm holes and (4) 16mm holes for use with 1-5/8 in. SnapStack or Click-on hangers

Part#: HG-064164-158

Support Hoisting Grip for 1/4 in coaxial cable

Part#: L1SGRIP

SnapStak Plus Adjustable Hanger for 51mm to 36mm Cable - No Grommets Required

Part#: SSH-XL

Grommet with single 14-36mm hole for a 1-5/8 in. hanger

Part#: HI-158-U

Universal Snap-in Hanger for elliptical waveguide 63

Part#: EWSH-63

Polymer PIM-Guard Antenna and RRU Cable Support Bracket with 12 positions for stackable hangers (up to 2 per position)

Part#: PGP-CS12

Butterfly Hanger for elliptical waveguide 63, 10 per package

Part#: 42396A-7

Flex-Twist Hanger Assembly for WR137

Part#: 244106A-70

Flex-Twist Hanger Assembly for WR75

Part#: 244106A-120

Grommet with 3 x 10 mm hole and 4 X 6 mm hole for 1-1/4" SnapStack or Click-on Hanger (photo illustrates typical grommet)

Part#: HG-064103-114